BLACKCOMB 6.1 B

NSF validated UV water filtration system

为了终极whole homeUV disinfection, LUMINOR's Class B BLACKCOMB6.1线应该是您的选择。该Blackcomb系列采用真正的254nm离散紫外线监测器,提供24小时持续监控的最终。使用Teflon技术进行减少污垢,这些传感器允许添加螺线管截止阀和4-20mA的输出,允许远程监控或数据记录。彩色用户界面允许简单地视识别UV强度,剩余灯泡寿命和任何错误或故障代码以及在启动时监视完整系统诊断。这UV系统甚至包含QR码通过Web Access访问灯具更改信息和视频。控制器是恒定电流电子电源,并安装在防溅盒中,标配“未来的”可扩展性端口,用于将来升级或选项。有关NSF的更多信息,请访问他们的网站www.nsf.org..

Rugged 304 stainless steel, single-end reactors allow for lamp change without the need to drain the reactor chamber. Reliable, industry proven, high quality low pressure (LP) coated UV lamps are used offering a consistent output over their 9,000 hour life. Flow rates of 29, 49, & 83 lpm (29, 49, & 83 gpm), in both 120V or 230V applications, are offered in the NSF Class B BLACKCOMB6.1series of products.

Optional Equipment Modules

Solenoid Module (MOD-SOL1)

Solenoid Module (MOD-SOL1)

  • Allows for a solenoid connection on LUMINOR BLACKCOMB (5.1 and 6.1 only) products (will work on lamp failure only on LUMINOR 5.1 systems)
  • 客户只需购买常闭线电压电磁阀并将模块的供应裸铅线粘贴到电磁阀
  • 将电源线连接到电源插座,另一个导致控制器上的“未来的”可扩展性端口

4-20 mA Module (MOD-420)

4-20 mA Module (MOD-420)

  • Allows for a 4-20mA connection on LUMINOR BLACKCOMB (5.1 and 6.1 only) products
  • 该设备将允许4-20mA信号传输UV输出到远程设备,例如数据记录器或计算机
  • 只需将所提供的IEP可扩展性端口插入UV传感器模块(或菊花链到系统中使用的任何其他模块)
  • 没有电线提供该系统,但需要16-22 AWG

Remote Alarm (Dry Contacts) Module (MOD-RAM)

Remote Alarm (Dry Contacts) Module (MOD-RAM)

  • Allows for a remote connection on LUMINOR BLACKCOMB (5.1 and 6.1 only) products
  • 允许远程安装警报,灯,PLC输入,数据记录器,流量控制等。
  • 只需将所提供的IEP可扩展性端口插入UV传感器模块(或菊花链到系统中使用的任何其他模块)
  • 提供三个螺钉端子(NO,NC&Common),连接到干触点的接收端
  • As the distance required is unknown, no wire is supplied with the system, however 16-22 AWG is required

SHERPA

SHERPA

  • 在家中的无线远程监控......所有光明(5.1和6.1)产品上的产品
  • Integral audible alarm and visual indicators for “GOOD”, “CAUTION”, and “ALARM” conditions
  • Hard wire option only (wall wart) (battery option to follow)
  • 随附连接到控制器的IEP端口的接收器和发射器以及其他模块
  • 灵活的安装配置
  • Can install up to 5 receivers per transmitter

Dealer Programming Module

Dealer Programming Module

As a dealer or distributor of UV systems, you realize the importance of making sure that your customers replace their UV lamps on a regular basis. Other systems come with lamp change reminders, but they do not ensure the repeat business comes back to you!

LUMINOR's BLACKCOMB line of UV systems come with the industry's first Dealer Programming Module. This module allows you to customize the controller's displayin the field!

BLACKCOMB 6.1 B

Interested in Luminor's BLACKCOMB 6.1 B Product?

在哪里买>