BLACKCOMB 5.1 B

NSF validated UV water filtration system

Looking for a feature-laden premium UV system, then LUMINOR's NSF Class B BLACKCOMB5.1line of全家UV treatmentsystems should be your choice. In looking at this line, one easily sees how this product is truly different from everything else in the market. BLACKCOMB's state-of-the-art 5.1 series controller is a constant current electronic power source housed in a splash-proof case and comes standard with a "future-proof" expandability port for future upgrades or options. A colour user interface allows for easy visual identification of remaining lamp life and any error or fault codes. TheUV系统甚至包含QR码通过Web Access访问灯具更改信息和视频。坚固耐用的304不锈钢,单端电抗器配有一个整体端口,以允许将来升级到UV监控系统。如果不需要监视器,则提供一体的视觉焕发插头作为额外的方式,以确保您的UV灯照明。单端设计允许灯变化而无需排出反应器室。可靠,行业经过验证,高质量的低压(LP)涂层紫外灯供使用,在9,000小时的生活中提供一致的输出。在NSF类B Blackcomb中提供了120V或230V应用中的11,20,29,49和83Lpm(3,5,7.5,13,​​29g)的流速,提供了120V或230V应用中的5.1series of products. For more information on NSF please visit their site atwww.nsf.org.

Optional Equipment Modules

Solenoid Module (MOD-SOL1)

Solenoid Module (MOD-SOL1)

  • Allows for a solenoid connection on LUMINOR BLACKCOMB (5.1 and 6.1 only) products (will work on lamp failure only on LUMINOR 5.1 systems)
  • Customer simply needs to purchase a NORMALLY CLOSED line voltage solenoid valve and affix the module’s supplied bare lead cord to the solenoid valve
  • Connect power cable to electrical outlet and the other lead to the “future-proof” expandability port on the controller

4-20 mA Module (MOD-420)

4-20 mA Module (MOD-420)

  • Allows for a 4-20mA connection on LUMINOR BLACKCOMB (5.1 and 6.1 only) products
  • This device will allow for a 4-20mA signal transfer of the UV output to a remote device such as a data logger or computer
  • Simply plug the supplied into the IEP expandability port on the UV sensor module (or daisy chain to any other module used in the system
  • No wire is supplied with this system, however 16-22 AWG is required

远程报警(干触点)模块(MOD-RAM)

远程报警(干触点)模块(MOD-RAM)

  • 允许远程连接在设计BLACKCOMB (5.1 and 6.1 only) products
  • Allows for the remote installation of alarms, lights, PLC input, data logger, flow control, etc.
  • Simply plug the supplied into the IEP expandability port on the UV sensor module (or daisy chain to any other module used in the system
  • Supplied with three screw terminals (NO, NC & common) to connect to the receiving end of the dry contacts
  • As the distance required is unknown, no wire is supplied with the system, however 16-22 AWG is required

SHERPA

SHERPA

  • Wireless remote monitoring within the home….works on all LUMINOR (both 5.1 and 6.1) products
  • Integral audible alarm and visual indicators for “GOOD”, “CAUTION”, and “ALARM” conditions
  • Hard wire option only (wall wart) (battery option to follow)
  • Supplied with both the receiver and transmitter which is connected to the IEP port of the controller as are other modules
  • Flexible mounting configurations
  • Can install up to 5 receivers per transmitter

Dealer Programming Module

Dealer Programming Module

As a dealer or distributor of UV systems, you realize the importance of making sure that your customers replace their UV lamps on a regular basis. Other systems come with lamp change reminders, but they do not ensure the repeat business comes back to you!

Luminor的UV系统的Blackcomb系列与业界的第一个经销商编程模块附带。此模块允许您自定义控制器的显示屏in the field!

BLACKCOMB 5.1 B

Interested in Luminor's BLACKCOMB 5.1 B Product?

Where To Buy>